中国の世界の技術の医療機器のサービス・グループ
双方にとって好都合一緒に!
 |
| ブランド名: | Welch Allyn |
| モデル番号: | 300のシリーズ53NTP |
| 最小注文数量: | 1 |
|---|---|
| 受渡し時間: | 3-5仕事日 |
| 支払条件: | T/T、ウェスタン・ユニオン、PayPal |
| 製品名: | Welch Allynの徴候のモニター300シリーズ53NTP | PN: | A010-0232-01 REV LOT90148 AMTECH |
|---|---|---|---|
| 適用: | 医療機器、ICUの病院装置 | 保証: | 90days |
| 色: | 白い | 実用温度: | +104 °Fへの+10 °Cから+40 °C +50の°F |
| 動作高度: | -170 mから+4877のm -557のftへの+ 16,000のft | Shipping altitude: | -615 m to 12,300 m -2000 ft to 40,000 ft |
| 保管温度: | -20 °Cから+122 °Fへの+50の°C -4の°F | 相対湿度: | 15%への90% （不凝縮） |
| ハイライト: | REV LOT90148 Patient Monitor Parts,A010-0232-01 Patient Monitor Parts |
||
Welch Allyn Vital Signs Monitor 300 Series 53NTP SPO2 Assembly A010-0232-01 REV LOT90148 AMTECH
► Brief Introduction
If the SpO2 sensor is connected to the patient during the measurement period, the pulse amplitude indicator rises and falls in rhythm with the monitored heart rate. The higher the display rises, the stronger the measured pulse; however, the height of the indicator display is not mathematically proportional to the volume of the pulse.During prolonged, continuous SpO2 monitoring, check the sensor site often, in compliance with the sensor manufacturer’s directions. Inspect the patient’s skin integrity and circulation, and relocate the sensor if necessary. Tissue damage can result from improper or prolonged sensor attachment.
► Specification
| Operating Temperature | +10 °C to +40 °C +50 °F to +104 °F |
| Storage temperature | -20 °C to +50 °C -4 °F to +122 °F |
| Shipping altitude | -615 m to 12,300 m -2000 ft to 40,000 ft |
| Operating altitude | -170 m to +4877 m -557 ft to + 16,000 ft |
| Relative humidity | 15% to 90% (non-condensing) |
► Connecting and Disconnecting the SpO2 Sensor Cable
To connect the SpO2 sensor cable:
Verify that the sensor cable connector has slots on both sides. If the cable connector has a slot on only one side, then the sensor is not compatible with the monitor.
The SpO2 connectors are notched and flagged to ensure proper fit. If the connectors do not join easily, stop and verify the following:
• You have the correct SpO2 sensor.
• The cable connector is aligned correctly
If you are using a sensor extension cable, plug the sensor into the extension cable and plug the extension cable into the monitor.
► Disassembly
1. Remove the SpO2 assembly from the rear chassis and disassemble it as follows:
a. Remove the four screws (located on the inside of the rear chassis on the right side) securing the SpO2 assembly to the rear chassis
b. Remove the side panel and board assembly form the rear chassis
2. Remove the SpO2 board.
Remove the two screws securing the board to the side panel
► Shopping Information
Dear customers, To make sure the deal runs successfully and efficiently, please learn about and agree to the following clauses and terms. There are mainly two important things that you need to know well. The first thing is that you’d better bear in mind to look through all the product pictures with patience when purchasing so that you can confirm the item you are viewing is just what you are looking for and need to buy. It is absolutely necessary to do so as product pictures also play essential roles in product description, which helps you understand the product more intuitively and detailedly. The second thing comes to the customs fees. Please kindly know that the buyer is responsible for the customs fees such as all taxes and duties. Consequently, before paying for orders you must check out that the equipment your are ordering is allowed to imported into your country. That is to say, remember to read all the relevant information before ordering.
Thank you for your time! If you are interested in Welch Allyn Vital Signs Monitor 300 Series 53NTP SPO2 Assembly A010-0232-01 REV LOT90148 AMTECH, please let us know. Welcome to place your orders.
Thank you for your time and interest.
コンタクトパーソン: Rita
電話番号: 8618279091952
